- Flat-rate Australian delivery. Delivery info
- Need fitment advice? Call 07 3077 8884
CIRCO S83
Friction Summary: 0.32-0.36µ
Temperature Range: 0-600°C
Low-metallic Carbon
Rear Race Pad for RWD
Entry level trackday
Good modulation
Low-Medium friction
CIRCO S83 is a performance street & entry level track day compound also used extensively in rear axle competition configurations where friction repeatability is important along with a reduction in bite towards the end of a stop. This helps to reduce the likelihood of rear locking when the rear axle load is reduced as weight moves forward. This also helps with those needing to ‘trail-brake’ to achieve the desired turn-in. Typically used in front engine-rear drive cars but also suitable for other FWD where rear axle grip is sufficient.
Typical applications: Rear pads for RWD circuit racing or rally, Club level small cars front or rear
What you get:
1 part number = 1 set of pads. In most cases this is 4 pads per box. If your calipers take more than 2 pads per caliper (E.g Audi RS4), the part number you buy will include all the pads you need to service the axle set of calipers. Also included is bedding instructions to help you get the most out of your new pads.
Brake pad product notes:
Shims and Wear sensors
Our brake pad products are designed for high performance and competition use. Therefore, we do not always provide ancillary parts such as wear sensors or anti-squeal shims on some of the WinmaX and CIRCO range. Ancillary parts are provided in some cases depending on the pad specification and fitment. Anti-Squeal shims are available for some shapes as separate items on this website.
If you are unsure about any of this, please contact the us for confirmation.
| Fitment | Rear |
|---|---|
| Pad Compound | S83 |
| Pad Thickness | OE |